Candelabra / lampposts / street lighting / composite urban lighting
Standard range : public lighting STILI
The height of the poles varies between 3 to 14 meters, with a diameter at the top of 60mm or 78mm. The low weight of the street lighting lamp allows effortless manual handling, which means significant savings in transport, cranes and unloading equipment. Our poles for public lighting are available in all RALs.
Enhanced range : public lighting Fenyx
The height of the poles varies from 3 and 14 meters, with a diameter at the top of 60mm or 78mm. Our street lights are available in all RALs. Street lights do not corrode and are resistant to the most adverse climatic conditions. Our FENYX public lighting is resistant to attacks from the marine environment, characterized by strong winds and high humidity and salinity.
The TAJO range of public lighting
The height of this range of street light varies between 3 and 6 meters, with a diameter at the top of 60mm. The Tajo candelabra range represents an aesthetic innovation, due to its design based on cylindrical sections. This range of luminaires has been designed for decorative lighting of gardens, parks, residential areas, etc. and also exists in a textured wrought iron type finish.
Specific and autonomous lighting made to measure
DESCHAMPS Mâts Composite, has been designing and manufacturing all types of custom-made candelabra poles for more than 10 years (poles with complex designs, curves, etc.). We also design solar street lights. Our design office can advise, study, test and respond to specific lighting specifications according to your needs.
Examples of luminaire brackets
BREL 60-78 models
Straight butt 0.60m long.
To be fixed on poles with a diameter at the top of 60 or 78mm.
S-BRACE 78 models
Right butt with a length of 1.50m.
To be fixed on poles with a diameter at the top of 78mm.
Straight butt with a length of 1.00m which adapts to all heights of the poles. Possible tilt of +/- 15 °.
Straight butt 1.00m long.
with stainless steel guy line and ball at the top.
Decorative curved stock which adapts to all heights of the pole.
PROYECT 2 models
Straight stock 1.20m long in rectangular section. To be fixed on poles with a diameter at the top of 78mm.
BREX 78 models
Quadruple straight stock, to be attached to poles with a top diameter of 78mm.
D-BRACE 78 models
Straight butt 3.00m long. To be fixed on poles with a diameter at the top of 78mm.
100% fiberglass composite urban lighting poles
The advantages of composite for public lighting
Our exclusive technical molding allow us to offer street lamps:
Our public lighting is solid (standard EN40-7 and EN 12767)
Floor lamps are light
Our posts are insensitive to corrosion
Urban lighting insulating (no connection to the earth)
The candelabras have a low maintenance cost
Our poles resist to the aggressions of the marine environment (strong winds, humidity and high salinity)
Public lighting aesthetic
Our services to serve you
Listening to our customers
Studies / Prototyping for public lighting
DESCHAMPS Mâts Composite studies, designs and manufactures all types of composite poles for your lighting.
Street light installations for public lighting
DESCHAMPS Mâts Composite studies the best installation of your lighting and guarantees you the final result.
Maintenance / after-sales service of your street lights
DESCHAMPS Mâts Composite intervenes on demand or under a periodic maintenance contract in order to maintain your public lighting.
Recycling your street lights
DESCHAMPS Mâts Composite takes back the lampposts to be replaced and recycles them in the appropriate sectors.
They trust us
COMATELEC, THORN, ADP, BOUYGUES, ENGIE, EIFFAGE, SPIE, CONIMAST, CLEMESSY, TERRANA, SIEGE 27, VINCI, VILLE DE FREJUS, METROPOLE DE NICE, METROPOLE DU MANS, ...
French manufacturer of fiberglass composite poles since 1956
DESCHAMPS Mâts Composite
Located in Fréjus in FRANCE, DESCHAMPS was founded in 1956 by the creator of the famous boat LE PONANT, and was then the first company in the world to produce polyester fiberglass poles.
Even today, DESCHAMPS is the only manufacturer in France of flag poles in Resin Glass Laminate (SVR). The exclusive manufacturing technique of Deschamps poles guarantees perfect consistency in production, which has enabled us to obtain compliance with the Snow and Wind standard.
The ingenuity of the equipment, patented in many countries, and the quality of production, make Deschamps poles the world reference (40% for export) for polyester fiberglass poles, and are gradually establishing themselves in new markets. in which it has been interested since 2006, such as the candelabra market, or the maritime beacon.
The sales team is responsive and available, and will meet you at the Trade Shows where DESCHAMPS products are exhibited.